Features
Two lines and one hard machining center refers to the X-axis and Y-axis with line rails, and the Z-axis with hard rail design. The obvious advantage is that it can process multiple material products, which is more efficient than the three line rail design but can process awide rrange of materials. It takes into account the advantages of both line rail machining centers and hard rail machining centers, and is very suitable for processing a variety of materials.
Extra Wide Bed And Column Castings
The stability of any building structure, whether it is an ordinary house, a skyscraper,or a suspension bridge, depends on whether its foundation is stable. Forvertical machining centers, their stability also depends on the base and column. The processing performance of a machine tool is closely related to the stability of its base.
Heavy Duty Cast Iron Base
All major components of the machine tool are made of castiron, with a shock absorption capacity that can reach 10 times that of steel. All castings are reinforced with heavy-duty reinforcing ribsto reduce distortion and improve shock absorption capacity. In addition, each casting undergoes a comprehensive inspection before and after processing to ensure that it is flawless.
Review the specifications of our VCN Series below, and then contact us for assistance in identifying the right mechanical press for your application.
Technical Datas
| ITEM | UNIT | VCN-855 | VCN-970 | VCN-1165 | VCN-1270 | VCN-1370 | VCN-1580 | |
| Control | Controller | GOANWIN/MITSUBISHI/FANUC | ||||||
| Spindle motor power | kw | 7.5/11 | 11.0 | 11 | 15 | 15 | 15/18.5 | |
| X/Y/Z-axis motor power | kw | 3.0/3.0/3.0B | 3.0/3.0/3.0B | 3.0/3.0/3.0B | 3.0/3.0/3.0B | 3.5/3.5/3.5B | 3.5/3.5/3.5B | |
| Z-axis counterweight method(optional) | Nitrogen | |||||||
| Stroke | X-axis travel | mm | 800 | 1100 | 1100 | 1200 | 1300 | 1500 |
| Y-axis travel | mm | 550 | 600 | 650 | 700 | 700 | 800 | |
| Z-axis travel | mm | 550 | 700 | 600 | 700 | 700 | 700 | |
| Spindle nose end to countertop | mm | 110-660 | 95-795 | 130-730 | 140-840 | 90-790 | 130-830 | |
| Three-axis track | Track design | Two axis roller | ||||||
| Track width | mm | 35/45/Hard rail | 45/45/Hard rail | |||||
| Number of sliders(X,Y,Z) | 4/4/Hard rail | 6/4/Hard rail | ||||||
| Screw diameter/pitch | mm | 4012 | 4012 | 4012 | 4012 | 5010 | 5010 | |
| Spindle | Spindle style | BT40 | BT40 | BT40 | BT40/BT50 | BT50 | BT50 | |
| Spindle style selection | BBT40 | BBT40 | BBT40 | BBT40 | BBT50 | BBT50 | ||
| Spindle diameter | Ø150/Ø155 | Ø150/Ø155 | Ø150/Ø155 | Ø150/Ø155 | Ø155/Ø190 | Ø155/Ø190 | ||
| Main shaft transmission mode(standard configuration) | Belt-drive | Belt-drice/Gearbox | ||||||
| Main shaft transmission mode(optional) | Direct type | |||||||
| Spindle speed(standard configuration) | rpm | 8000 | 8000 | 8000 | 8000 | 8000 | 8000 | |
| Spindle speed(optional) | rpm | Direct type 12000/15000 | ||||||
| From the center of the spindle to the vertical cylinder surface | mm | 600 | 654 | 680 | 760 | 785 | 810 | |
| Spindle motor power | N/m | 51 | 51 | 51 | 72 | 72 | 72 | |
| Feed | X/Y/Z-axis rapid feed | m/min | 36/36/15 | 24/24/12 | 24/24/12 | 16/16/12 | 16/16/12 | 12/12/12 |
| Min. setting unit for XYZ-axis | 0.001 | 0.001 | 0.001 | 0.001 | 0.001 | 0.001 | ||
| Feed rate | m/min | 10 | 10 | 10 | 10 | 10 | 10 | |
| Workbench | Workbench size | mm | 1000x550 | 600x1200 | 1200x600 | 700x1400 | 1360x700 | 800x1700 |
| T-shaped groove(width*number) | mm | 5-18-90 | 5-18-110 | 5-18-100 | 5-18-110 | 5-18-122 | 5-22-135 | |
| Max. load | kg | 600 | 800 | 800 | 1000 | 1000 | 1500 | |
| Accuracy | Positioning accuracy(JIS 6338) | mm | ±0.005/300 | 0.008 | ±0.005/300 | 0.008 | 0.008 | 0.008 |
| Repetitive accuracy(JIS 6338) | mm | ±0.003 | 0.005 | ±0.003 | 0.005 | 0.005 | 0.005 | |
| Automatic tool change system | Tool magazine capacity | Disk 24T | ||||||
| Tool handle type | BT40 | BT40 | BT40 | BT40 | BT50 | BT50 | ||
| Tool change time(T-T) | sec | 1.8(Arm type) | 2.5(T-T) | 1.8(Arm type) | 2.5(T-T) | 2.5(T-T) | 3.5(T-T) | |
| Max.tool diameter/adjacent tool diameter | 78/120 | 78/120 | 78/120 | 78/120 | 78/120 | 112/200 | ||
| Max. tool length | mm | 300 | 300 | 300 | 300 | 300 | 300 | |
| Max. tool weight | kg | 8 | 8 | 8 | 8 | 8 | 15 | |
| Other | Net weight(about) | kg | 5200 | 6800 | 7800 | 9000 | 9500 | 12000 |
| Cutting coolant capacity | L | 180 | 180 | 200 | 280 | 280 | 280 | |
| Lubricating oil tank capacity | L | 4 | 4 | 4 | 5 | 5 | 5 | |
| Power supply | LVA | 20 | 28 | 28 | 35 | 35 | 40 | |
| Pressure demand of air pressure unit | Par | 6 | 6 | 6 | 6 | 6 | 6 | |
| External dimensions(LxWxH) | mm | 2300x3780x2480 | 2800x4080x2650 | 2800x4480x2650 | 3200x4800x3800 | 3200x4800x3800 | 3200x5160x3800 | |
Hot Tags: high rigidity vertical machining center, China high rigidity vertical machining center manufacturers, suppliers, factory, H-Frame High Speed Press, H Frame Single Crank Mechanical Press, CNC Lathe Machining Center, CNC Horizontal Machining Center, C Frame Mechanical Press Machine, c frame press
