+86-574-86562707
You are here: Home » Products » Feeder and Accessories » New High speed gripper feeder

Contact Us

Add: No.318 Guangming  Road,       
       Guangming Industrial Zone,              Ningbo, China
Tel:  +86-574-86562707        
Fax: +86-574-86562705
Email:ivy@goanwin.com  
Share to:

New High speed gripper feeder

Quantity:
·Mechanical driver device for material feeder.Applied with swing wheel transfer cam.Material feed degree on 165°.With 15° stop area in the end of cam design.Pre-pressure middle of cam and accompany device.It will make sure zero gap and high-precision material feed.
 
·Surface contact design with material press area.It will decrease the pressure on the material surface.No scratch issues happen even if soft material.
 
·Clutch cam and swing wheel cam drive by the same device.Clutch cam be assembled with moving press plate cam,Fixed press cam and guided cam,It will drive the clippers under all different plates moving up and down.So finished the necessary release and press activity during in material feeder.
 
·Material feed length will be adjusted by the face side hand-roll.During the operating also you can change the material feed length.Material tenth will be showed in digital display with 1% millimeters precision.
 
·Material thickness change will be adjusted by the left side bolt,And will be confirmed with the face side dial device.
 
·Very easy to clean the material guider.Clippers because all drive devices be designed in under material feeder surface.
 

Feeder length

0-80mm

Feeder width

8-80mm

Max material thickness

2.0mm

Material direction

Left→Right

Install location

Left

Drive axis round direction

CW/CCW

Feeder angle

165°

Release gap

0.5mm

Press gap

0.1mm

Release angle

60°

Press plate width

50mm(Center max width 6mm)

AIr pressure

Min 0.44mpa


Product Inquiry
Our company carry good quality and
effective after-sales service, create good
sales performance and well feedback, all
to strengthen our position in this field.
 

CONTACT US

+86-574-86562707
Ask your questions by E-mail
ivy@goanwin.com
©Copyright 2015 NingBo Goanwin Machinery Manufacturing Co., Ltd.